產品展示
TP110 CATALYST (SIMILAR TO ESCATE 110)
Description
TP110 is an catalyst supplied in the undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Typica systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, and polyesters cured by GMA functional acrylics. Polyester-TGIC and polyester- PT-910 reactions can also be accelerated. The key benefit of incorporating TP110 is to reduce the cure temperature of a particular system, or shorten the required bake time at a given cure temperature.
?
Specification
Appearance |
White or Light Yellow Powder |
Purity |
99% minimum |
Melting Point |
127 - 132℃ |
Water Content |
0.5% maximum |
* Not to be used for specification purposes
?
Application
Recommended usage level is 0.1 – 0.3% of TP 110 based on total formula weight. Each application should be tested to determine the optimum catalyst level to achieve the desired cure time and coating properties.
?
Product Availability?
This product is commercially available and may require lead time
?
Regulatory Listings
The components of this material are either listed or exempt from listing due to polymer exemption criteria for the following chemical inventory listings: EINECS (Europe), ENCS (Japan), IECSC (China), NDSL (Canada), PICCS (Philippines), NZloC (New Zealand), SWISS (Switzerland), TSCA (USA).
?
Packing、Storage & Handling
1.25.0 kg in Fiber drum with polyolefin liner
2.Store in a dry, cool area and avoid excessive heat.
3.Shelf life of unopened containers is one year from date of shipment.
4.See SDS for additional information.?
?
?
